Hydrocarbons for MDCAT: Alkanes, Alkenes, Alkynes, Benzene
On this page
Hydrocarbons are a core part of the organic chemistry section in the MDCAT. This guide breaks down alkanes, alkenes, alkynes, and benzene to help you tackle hydrocarbons mdcat mcqs with confidence. We will focus on structures, naming, and the most common reactions tested in the exam.
Understanding these compounds is essential because they form the basis of organic chemistry. In the MDCAT, questions often test your ability to predict products of reactions or identify isomers. Let us look at each class of hydrocarbon in detail.
Alkanes: Saturated Hydrocarbons
Alkanes are the simplest hydrocarbons. They contain only single bonds between carbon atoms. This makes them "saturated," meaning they hold the maximum number of hydrogen atoms possible. The general formula for non-cyclic alkanes is CnH2n+2.
Structure and Bonding
In alkanes, every carbon atom is sp3 hybridized. This creates a tetrahedral geometry with bond angles of approximately 109.5 degrees. The bonds are sigma bonds, which are strong and allow free rotation around the carbon-carbon axis. This rotation leads to different spatial arrangements called conformations, such as staggered and eclipsed forms in ethane.
Key Reactions
Alkanes are relatively unreactive compared to other hydrocarbons. They do not react with acids, bases, or oxidizing agents under normal conditions. The two main reactions you must know for the MDCAT are:
- Combustion: Alkanes burn in oxygen to produce carbon dioxide and water. This reaction releases a large amount of heat energy.
- Free Radical Substitution: This occurs in the presence of ultraviolet (UV) light or high heat. A hydrogen atom is replaced by a halogen atom (like chlorine or bromine).
For example, methane reacts with chlorine to form chloromethane and hydrogen chloride. The mechanism involves three steps: initiation, propagation, and termination. In initiation, UV light breaks the chlorine molecule into two radicals. In propagation, these radicals react with methane to form new radicals and products. Termination happens when two radicals combine to stop the chain reaction.
Alkenes: Unsaturated Hydrocarbons
Alkenes contain at least one carbon-carbon double bond. This makes them "unsaturated" because they have fewer hydrogen atoms than alkanes with the same number of carbons. The general formula for non-cyclic alkenes with one double bond is CnH2n.
Structure and Bonding
The carbon atoms involved in the double bond are sp2 hybridized. This creates a trigonal planar geometry with bond angles of 120 degrees. The double bond consists of one sigma bond and one pi bond. The pi bond is weaker than the sigma bond and prevents free rotation. This lack of rotation leads to geometric isomerism, known as cis-trans or E-Z isomerism.
Key Reactions
Alkenes are much more reactive than alkanes. The pi bond is an area of high electron density, making it attractive to electrophiles (electron-seeking species). The most common reaction type is electrophilic addition.
- Hydrogenation: Adding hydrogen gas (H2) in the presence of a metal catalyst (like nickel, palladium, or platinum) converts an alkene into an alkane. This is a reduction reaction.
- Halogenation: Adding bromine (Br2) or chlorine (Cl2) across the double bond forms a dihaloalkane. This reaction is often used as a test for unsaturation because the brown color of bromine disappears when it reacts with an alkene.
- Hydration: Adding water (H2O) in the presence of an acid catalyst (like H2SO4) forms an alcohol. This follows Markovnikov’s rule.
Markovnikov’s Rule
This rule is crucial for hydrocarbons mdcat mcqs. It states that in the addition of a protic acid (like H-Br or H-OH) to an asymmetric alkene, the hydrogen atom attaches to the carbon with more hydrogen atoms already attached. The other part of the molecule (like Br or OH) attaches to the carbon with fewer hydrogen atoms. This happens because the reaction proceeds through the most stable carbocation intermediate.
Alkynes: Triple Bonded Hydrocarbons
Alkynes contain at least one carbon-carbon triple bond. The general formula for non-cyclic alkynes with one triple bond is CnH2n-2. The simplest alkyne is ethyne, commonly known as acetylene.
Structure and Bonding
The carbon atoms in the triple bond are sp hybridized. This results in a linear geometry with bond angles of 180 degrees. The triple bond consists of one sigma bond and two pi bonds. The presence of two pi bonds makes alkynes very reactive, similar to alkenes but often more so.
Key Reactions
Alkynes undergo electrophilic addition reactions similar to alkenes. However, they can add two equivalents of a reagent because there are two pi bonds.
- Addition of Halogens: Adding one mole of bromine converts an alkyne to a dihaloalkene. Adding a second mole converts it to a tetrahaloalkane.
- Hydrogenation: Adding hydrogen can stop at the alkene stage if a poisoned catalyst (like Lindlar’s catalyst) is used. This produces a cis-alkene. Using a standard catalyst like palladium will fully reduce the alkyne to an alkane.
- Acidity of Terminal Alkynes: This is a frequent exam topic. The hydrogen atom attached to a terminal alkyne carbon (a carbon at the end of the chain) is weakly acidic. This is because the sp hybridized carbon has 50% s-character, which holds the electrons closer to the nucleus, stabilizing the resulting negative charge (acetylide ion). Terminal alkynes can react with strong bases like sodium amide (NaNH2) to form acetylide ions. These ions are useful nucleophiles for forming new carbon-carbon bonds.
Practise this on Khaab
Thousands of MDCAT and ECAT MCQs, clearly explained, with full mock tests. Free on Android and Windows.
Benzene and Aromatic Hydrocarbons
Benzene (C6H6) is the simplest aromatic hydrocarbon. It is a cyclic compound with six carbon atoms. Unlike alkenes, benzene does not behave like a typical unsaturated compound. It does not easily undergo addition reactions because that would destroy its stable aromatic system.
Structure and Stability
Benzene has a ring structure with alternating single and double bonds in its Lewis structure. However, the actual structure is a resonance hybrid. The pi electrons are delocalized over all six carbon atoms. This delocalization provides extra stability, known as aromatic stability. The bond lengths in benzene are all equal, intermediate between a single and a double bond.
Key Reactions: Electrophilic Aromatic Substitution
Because addition would break the stable ring, benzene prefers substitution reactions. In these reactions, a hydrogen atom on the ring is replaced by another group, while the aromatic ring remains intact. This is called Electrophilic Aromatic Substitution (EAS).
Common EAS reactions include:
- Nitration: Benzene reacts with nitric acid (HNO3) in the presence of sulfuric acid (H2SO4) to form nitrobenzene.
- Halogenation: Benzene reacts with bromine (Br2) or chlorine (Cl2) in the presence of a Lewis acid catalyst (like FeBr3 or AlCl3) to form halobenzenes.
- Sulfonation: Benzene reacts with fuming sulfuric acid to form benzenesulfonic acid.
- Friedel-Crafts Alkylation/Acylation: These reactions add alkyl or acyl groups to the benzene ring using aluminum chloride (AlCl3) as a catalyst.
Substituent Effects
When a benzene ring already has a substituent, it affects where the next group will attach.
- Ortho/Para Directors: Groups like -OH, -NH2, and -CH3 activate the ring and direct new groups to the ortho (adjacent) and para (opposite) positions.
- Meta Directors: Groups like -NO2, -COOH, and -CHO deactivate the ring and direct new groups to the meta position.
Summary of Hydrocarbon Reactions
The table below summarizes the key reactions for each hydrocarbon class. This is a quick reference for your revision.
| Hydrocarbon Class | General Formula | Hybridization | Main Reaction Type | Key Reagent/Condition |
|---|---|---|---|---|
| Alkanes | CnH2n+2 | sp3 | Free Radical Substitution | UV Light, Halogen (Cl2/Br2) |
| Alkenes | CnH2n | sp2 | Electrophilic Addition | H2/Ni, Br2, H2O/H+ |
| Alkynes | CnH2n-2 | sp | Electrophilic Addition | H2/Lindlar, Br2, NaNH2 |
| Benzene | C6H6 | sp2 | Electrophilic Aromatic Substitution | HNO3/H2SO4, Br2/FeBr3 |
Practice MCQs
Here are five original questions to test your understanding of hydrocarbons mdcat mcqs.
Which of the following compounds will decolorize bromine water?
- ACyclohexane
- BBenzene
- CEthene
- DMethane
According to Markovnikov’s rule, what is the major product when propene reacts with HBr?
- A1-bromopropane
- B2-bromopropane
- C1,2-dibromopropane
- DPropane
Which reagent is used to convert an alkyne into a cis-alkene?
- AH2 with Pd/C
- BH2 with Lindlar’s catalyst
- CNa in liquid NH3
- DBr2 in CCl4
Benzene undergoes nitration to form nitrobenzene. Which catalyst is required for this reaction?
- AFeBr3
- BAlCl3
- CConcentrated H2SO4
- DUV Light
Which of the following is the most acidic hydrogen?
- AHydrogen in ethane
- BHydrogen in ethene
- CHydrogen in ethyne
- DHydrogen in benzene
Frequently Asked Questions
How many marks are allocated to organic chemistry in MDCAT?
The MDCAT paper has 180 MCQs in total. Chemistry makes up 45 of these questions. Organic chemistry is a significant portion of the chemistry section, so you should expect several questions on hydrocarbons and related topics.
Do I need to memorize all reaction mechanisms for MDCAT?
You do not need to draw complex mechanisms step-by-step. However, you must understand the key steps, such as the formation of carbocations in addition reactions or radicals in substitution reactions. Knowing the intermediates helps you predict the major product.
Is negative marking present in MDCAT for chemistry questions?
No, there is no negative marking in the MDCAT. Each correct answer is awarded 1 mark. This means you should attempt every question. If you are unsure, use logical reasoning to eliminate wrong options and make an educated guess.
How is the MDCAT score combined with FSc marks for admission?
The aggregate for admission is a weighted mix of MDCAT, FSc (HSSC), and Matric (SSC) scores. A widely used split is MDCAT 50%, FSc 40%, and Matric 10%. However, the exact weights are set by each admitting authority, so you must check the current prospectus for the specific university you are applying to.