Khaab خواب

Chemical Equilibrium for MDCAT

Updated 2026-11-16 · 7 min read
On this page
  1. What is Chemical Equilibrium?
  2. The Equilibrium Constant (Kc)
  3. Kp and the Relationship with Kc
  4. Le Chatelier’s Principle
  5. Summary Table for Quick Revision
  6. Common Mistakes in MDCAT
  7. Practice MCQs
  8. Frequently Asked Questions

Chemical equilibrium is a core topic in the MDCAT Chemistry section. Understanding how reactions balance and shift helps you solve many conceptual questions. This guide breaks down the key ideas you need for the exam.

What is Chemical Equilibrium?

In a reversible reaction, reactants turn into products, and products turn back into reactants. At first, the forward reaction is fast because there are many reactants. As products build up, the reverse reaction speeds up.

Eventually, the rate of the forward reaction equals the rate of the reverse reaction. This state is called dynamic equilibrium. It is dynamic because the reactions are still happening. However, the concentrations of reactants and products stay constant. They do not change over time.

For MDCAT, remember that equilibrium does not mean equal concentrations. It means equal rates. The amounts of reactants and products can be very different.

The Equilibrium Constant (Kc)

The equilibrium constant, written as Kc, tells us the ratio of products to reactants at equilibrium. It is calculated using the concentrations of the substances involved.

For a general reaction:

aA + bB ⇌ cC + dD

The formula for Kc is:

Kc = [C]^c [D]^d / [A]^a [B]^b

Here, the square brackets mean concentration in moles per liter. The small letters are the coefficients from the balanced equation.

Key Rules for Kc

  1. Pure Solids and Liquids are Excluded: Do not include pure solids or pure liquids in the Kc expression. Their concentrations do not change significantly.
  2. Temperature Only: Kc changes only if the temperature changes. Pressure or concentration changes do not alter the value of Kc.
  3. Large Kc: If Kc is much greater than 1, products are favored. The reaction goes almost to completion.
  4. Small Kc: If Kc is much less than 1, reactants are favored. Very little product is formed.

Kp and the Relationship with Kc

When dealing with gases, we often use partial pressures instead of concentrations. This constant is called Kp.

For the same reaction:

aA(g) + bB(g) ⇌ cC(g) + dD(g)

Kp = (P_C)^c (P_D)^d / (P_A)^a (P_B)^b

Here, P represents the partial pressure of each gas.

Converting Between Kc and Kp

You can convert between Kc and Kp using the ideal gas law. The formula is:

Kp = Kc (RT)^Δn

In this equation:

To find Δn, subtract the total moles of gaseous reactants from the total moles of gaseous products.

Δn = (moles of gaseous products) - (moles of gaseous reactants)

If Δn is zero, then Kp equals Kc. This happens when the number of gas molecules is the same on both sides.

Khaab app icon

Practise this on Khaab

Thousands of MDCAT and ECAT MCQs, clearly explained, with full mock tests. Free on Android and Windows.

Le Chatelier’s Principle

Le Chatelier’s Principle is the most important concept for predicting how equilibrium shifts. It states that if a system at equilibrium is disturbed, the system will shift to counteract the disturbance.

Think of it as the system trying to "undo" the change you made.

Effect of Concentration Changes

Effect of Pressure Changes

Pressure changes only affect reactions involving gases. Increasing pressure means decreasing volume.

Effect of Temperature Changes

Temperature is unique because it changes the value of Kc. You must know if the reaction is exothermic or endothermic.

Effect of a Catalyst

A catalyst speeds up both the forward and reverse reactions equally. It helps the system reach equilibrium faster. However, it does not change the position of equilibrium. It does not change Kc or the final concentrations.

Summary Table for Quick Revision

Disturbance System Response Effect on Kc
Add Reactant Shifts Right No Change
Remove Product Shifts Right No Change
Increase Pressure Shifts to fewer gas moles No Change
Increase Temp (Exo) Shifts Left Decreases
Increase Temp (Endo) Shifts Right Increases
Add Catalyst Reaches equilibrium faster No Change

Common Mistakes in MDCAT

  1. Confusing Rate with Concentration: Students often think equilibrium means equal concentrations. Remember, it means equal rates.
  2. Including Solids in Kc: Always check the state symbols. If a substance is solid (s) or liquid (l), leave it out of the expression.
  3. Ignoring Δn in Kp: When calculating Kp from Kc, ensure you count only the gas molecules. Do not include solids or liquids in the Δn calculation.
  4. Catalyst Misconception: Do not choose answers that say a catalyst increases yield. It only increases the rate.

Practice MCQs

For the reaction N2(g) + 3H2(g) ⇌ 2NH3(g), which expression correctly represents the equilibrium constant Kc?

  • AKc = [NH3] / ([N2][H2])
  • BKc = [NH3]^2 / ([N2][H2]^3)
  • CKc = ([N2][H2]^3) / [NH3]^2
  • DKc = [2NH3] / ([N2][3H2])
Answer: B. The concentration of each product is raised to its stoichiometric coefficient and divided by the reactants raised to their coefficients.

A reaction is at equilibrium. If the volume of the container is suddenly decreased, in which direction will the equilibrium shift for the reaction PCl5(g) ⇌ PCl3(g) + Cl2(g)?

  • ATo the left (towards PCl5)
  • BTo the right (towards PCl3 and Cl2)
  • CNo shift occurs
  • DThe reaction stops completely
Answer: A. Decreasing volume increases pressure. The system shifts to the side with fewer moles of gas (1 mole on left vs 2 moles on right) to reduce pressure.

For an exothermic reaction, what happens to the value of the equilibrium constant Kc if the temperature is increased?

  • AKc increases
  • BKc decreases
  • CKc remains unchanged
  • DKc becomes zero
Answer: B. In an exothermic reaction, heat is a product. Increasing temperature adds heat, shifting equilibrium to the left and decreasing Kc.

Which of the following statements about a catalyst in a reversible reaction is true?

  • AIt increases the yield of the product.
  • BIt changes the value of Kc.
  • CIt speeds up the forward reaction but slows down the reverse reaction.
  • DIt helps the system reach equilibrium faster without changing the position.
Answer: D. A catalyst lowers the activation energy for both directions equally, speeding up the approach to equilibrium but not altering the final state.

For the reaction 2SO2(g) + O2(g) ⇌ 2SO3(g), what is the value of Δn used in the conversion formula Kp = Kc(RT)^Δn?

  • A1
  • B-1
  • C0
  • D2
Answer: B. Δn = moles of gaseous products - moles of gaseous reactants. Here, 2 - (2 + 1) = 2 - 3 = -1.

Frequently Asked Questions

Does adding an inert gas affect equilibrium?

If the volume is constant, adding an inert gas does not change the partial pressures of the reacting gases. Therefore, the equilibrium position does not shift. However, if the pressure is kept constant by increasing volume, the partial pressures drop, and the system may shift.

Can Kc be negative?

No, Kc cannot be negative. It is a ratio of concentrations raised to powers. Since concentrations are always positive, the result is always positive. A very small positive number means reactants are favored, but it is never negative.

How do I know if a reaction is at equilibrium?

You can check if the reaction quotient (Q) equals the equilibrium constant (K). If Q equals K, the system is at equilibrium. If Q is less than K, the reaction moves forward. If Q is greater than K, it moves backward.

Is MDCAT Chemistry difficult?

MDCAT Chemistry is conceptual and requires strong basics. It is not just about memorizing facts. You need to understand trends, calculations, and principles like chemical equilibrium. Practice solving problems to improve your speed and accuracy.

Khaab app icon

Practise this on Khaab

Thousands of MDCAT and ECAT MCQs, clearly explained, with full mock tests. Free on Android and Windows.

Exam rules, dates and fees change. Always confirm them on the official PMDC, university or UET notice.

Related guides